Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples
This example shows how to globally enable IEEE 802.1x authentication on a switch:
Switch(config)# dot1x system-auth-control
This example shows how to globally enable the optional guess VLAN behavior on the switch:
Switch(config)# dot1x guest-vlan supplicant
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands
Command
dot1x critical (global
configuration)
dot1x guest-vlan
dot1x port-control
show dot1x
interface-id]
OL-13271-03
Description
Configures the parameters for the inaccessible authentication bypass
feature on the switch.
Enables and specifies an active VLAN as an IEEE 802.1x guest VLAN.
Enables manual control of the authorization state of the port.
[interface
Displays IEEE 802.1x status for the specified port.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
dot1x
2-119
Advertisement
Table of Contents
