Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples
This example shows how to configure a port as a multicast router port:
Switch(config)# ip igmp snooping vlan 1 mrouter interface gigabitethernet1/0/2
This example shows how to specify the multicast router learning method as CGMP:
Switch(config)# ip igmp snooping vlan 1 mrouter learn cgmp
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Related Commands
Command
ip igmp snooping report-suppression
show ip igmp snooping
show ip igmp snooping groups
show ip igmp snooping mrouter
show ip igmp snooping querier
OL-13271-03
Description
Enables IGMP report suppression.
Displays the snooping configuration.
Displays IGMP snooping multicast information.
Displays the IGMP snooping router ports.
Displays the configuration and operation information for
the IGMP querier configured on a switch.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
ip igmp snooping vlan mrouter
2-239
Advertisement
Table of Contents
