Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
network-policy profile (global configuration)
Use the network-policy profile global configuration command to create a network-policy profile and to
enter network-policy configuration mode. Use the no form of this command to delete the policy and to
return to global configuration mode.
Syntax Description
profile number
Defaults
No network-policy profiles are defined.
Command Modes
Global configuration
Command History
Release
12.2(50)SE
Usage Guidelines
Use the network-policy profile global configuration command to create a profile and to enter
network-policy profile configuration mode.
To return to the privileged EXEC mode from the network-policy profile configuration mode, enter the
exit command.
When you are in network-policy profile configuration mode, you can create the profile for voice and
voice-signalling by specifying the values for VLAN, class of service (CoS), differentiated services code
point (DSCP), and tagging mode.
These profile attributes are then contained in the Link Layer Discovery Protocol for Media Endpoint
Devices (LLDP-MED) network-policy time-length-value (TLV).
Examples
This example shows how to create network-policy profile 60:
Switch(config)# network-policy profile 60
Switch(config-network-policy)#
Related Commands
Command
network-policy
network-policy profile
(network-policy configuration)
show network-policy profile
OL-13271-03
network-policy profile profile number
no network-policy profile profile number
Modification
This command was introduced.
Specify the network-policy profile number. The range is 1 to
4294967295.
Description
Applies a network-policy to an interface.
Configures the attributes of network-policy profiles.
Displays the configured network-policy profiles.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
network-policy profile (global configuration)
2-373
Advertisement
Table of Contents
