Show Controllers Tcam - Dell Catalyst 3130 Command Reference Manual

show controllers tcam

show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
hardware memory in the system and for all hardware interface ASICs that are content-addressable
memory-controllers.
Syntax Description asic
number
detail
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(40)EX1
Usage Guidelines This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-474
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
(Optional) Display port ASIC hardware information.
(Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
(Optional) Display detailed hardware register information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
OL-12248-03