Table of Contents
Advertisement
debug platform vlan
debug platform vlan
Use the debug platform vlan privileged EXEC command to enable debugging of the VLAN manager
software. Use the no form of this command to disable debugging.
Syntax Description
errors
mvid
rpc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
The undebug platform vlan command is the same as the no debug platform vlan command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
Command
show debugging
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
B-70
debug platform vlan {errors | mvid | rpc}
no debug platform vlan {errors | mvid | rpc}
Display VLAN error debug messages.
Display mapped VLAN ID allocations and free debug messages.
Display remote procedure call (RPC) debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
OL-13271-03
Advertisement
Table of Contents
