Ip Admission Name Proxy Http - Dell Catalyst 3130 Command Reference Manual

Blade switch
Table of Contents

Advertisement

Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands

ip admission name proxy http

Use the ip admission name proxy http global configuration command to enable web authentication.
Use the no form of this command to disable web authentication.
Syntax Description
This command has no arguments or keywords.
Defaults
Web authentication is disabled.
Command Modes
Global configuration
Command History
Release
12.2(40)EX1
Usage Guidelines
The ip admission name proxy http command globally enables web authentication on a switch.
After you enable web authentication on a switch, use the ip access-group in and ip admission web-rule
interface configuration commands to enable web authentication on a specific interface.
Examples
This example shows how to configure only web authentication on a switchport:
Switch# configure terminal
Switch(config) ip admission name http-rule proxy http
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# ip access-group 101 in
Switch(config-if)# ip admission rule
Switch(config-if)# end
This example shows how to configure IEEE 802.1x authentication with web authentication as a fallback
mechanism on a switchport.
Switch# configure terminal
Switch(config)# ip admission name rule2 proxy http
Switch(config)# fallback profile profile1
Switch(config)# ip access group 101 in
Switch(config)# ip admission name rule2
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# dot1x port-control auto
Switch(config-if)# dot1x fallback profile1
Switch(config-if)# end
OL-13271-03
ip admission name proxy http
no ip admission name proxy http
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
ip admission name proxy http
2-189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents