hw-module
This example shows how to enable OBFL on a standalone switch and to specify that only severity 1
hardware-related messages are stored in the flash memory of the switch:
Switch(config)# hw-module module 1 logging onboard message level 1
You can verify your settings by entering the
Related Commands
Command
clear logging
show logging
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-176
Chapter 2
Description
Removes the OBFL data in the flash memory.
onboard
Displays OBFL information.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
show logging
onboard privileged EXEC command.
OL-13271-03