Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples
This example shows how to globally set the last-listener query count:
Switch(config)# ipv6 mld snooping last-listener-query-count 1
This example shows how to set the last-listener query count for VLAN 10:
Switch(config)# ipv6 mld snooping vlan 10 last-listener-query-count 3
You can verify your settings by entering the show ipv6 mld snooping [vlan vlan-id] user EXEC
command.
Related Commands
Command
ipv6 mld snooping last-listener-query-interval
sdm prefer
show ipv6 mld snooping querier
OL-13271-03
Description
Sets IPv6 MLD snooping last-listener query
interval.
Configures an SDM template to optimize system
resources based on how the switch is being used.
Displays MLD snooping configuration.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
ipv6 mld snooping last-listener-query-count
2-265
Advertisement
Table of Contents
