Dell Catalyst 3130 Command Reference Manual page 458

sdm prefer
Table 2-16
templates for a desktop switch.
Table 2-16
Resource
Unicast MAC addresses
IPv4 IGMP groups and multicast routes
Total IPv4 unicast routes:
•
•
IPv6 multicast groups
Directly connected IPv6 addresses
Indirect IPv6 unicast routes
IPv4 policy-based routing ACEs
IPv4 or MAC QoS ACEs (total)
IPv4 or MAC security ACEs (total)
IPv6 security ACEs
Examples
This example shows how to configure the access template on a switch:
Switch(config)# sdm prefer access
Switch(config)# exit
Switch# reload
This example shows how to configure the routing template on a switch:
Switch(config)# sdm prefer routing
Switch(config)# exit
Switch# reload
This example shows how to configure the dual IPv4-and-IPv6 default template on a switch:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# exit
Switch# reload
This example shows how to change a switch template to the default template.
Switch(config)# no sdm prefer
Switch(config)# exit
Switch# reload
You can verify your settings by entering the show sdm prefer privileged EXEC command.
Related Commands Command
show sdm prefer
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-428
lists the approximate number of each resource supported in each of the dual IPv4-and IPv6
Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Directly connected IPv4 hosts
Indirect IPv4 routes
Description
Displays the current SDM template in use or displays the templates that can
be used, with approximate resource allocation per feature.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Default Routing
2 K 1.5 K
1 K 1 K
3 K 2.75 K
2 K 1.5 K
1 K 1.25 K
1 K 1 K
2 K 1.5 K
1 K 1.25 K
0 0.25 K
0.5 K 0.5 K
1 K 0.5 K
1 K 1 K
VLAN
8 K
1 K for IGMP groups
0 for multicast routes
0
0
0
1 K
0
0
0
0.5 K
1 K
0.5 K
OL-12248-03