Dell Catalyst 3130 Command Reference Manual page 313

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Examples This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged
EXEC command.
Related Commands Command
channel-group
lacp system-priority
show lacp
internal
OL-13271-03
[channel-group-number]
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
lacp port-priority
2-283