Dell Catalyst 3130 Command Reference Manual page 375

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
This example shows how to assign the ingress bandwidths for the queues in the stack. Queue 1 is the
priority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues
1 and 2 is 4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percent
bandwidth. Then SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and
2 by allocating 45 percent to each queue:
Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10
Switch(config)# mls qos srr-queue input bandwidth 4 4
You can verify your settings by entering the show mls qos interface [interface-id] queueing or the show
mls qos input-queue privileged EXEC command.
Related Commands Command
mls qos srr-queue input buffers
mls qos srr-queue input cos-map
mls qos srr-queue input dscp-map
mls qos srr-queue input priority-queue
mls qos srr-queue input threshold
show mls qos input-queue
show mls qos interface
OL-13271-03
Description
Allocates the buffers between the ingress queues.
Maps class of service (CoS) values to an ingress queue or
maps CoS values to a queue and to a threshold ID.
Maps Differentiated Services Code Point (DSCP) values
to an ingress queue or maps DSCP values to a queue and
to a threshold ID.
Configures the ingress priority queue and guarantees
bandwidth.
Assigns weighted tail-drop (WTD) threshold percentages
to an ingress queue.
Displays ingress queue settings.
queueing Displays quality of service (QoS) information.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
mls qos srr-queue input bandwidth
2-345