Table of Contents
Advertisement
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
remote command
Use the remote command privileged EXEC command to monitor all or specified stack members.
This command is supported only on stacking-capable switches.
Note
Syntax Description
all
stack-member-number
LINE
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
The commands (such as debug, show, or clear) you use in the LINE command-to-execute string apply
to a specific stack member or to the switch stack.
Examples
This example shows how to execute the undebug command on the switch stack:
Switch(config)# remote command all undebug all
Switch :1 :
------------
All possible debugging has been turned off
Switch :5 :
------------
All possible debugging has been turned off
Switch :9 :
------------
All possible debugging has been turned off
This example shows how to execute the debug udld event command on stack member 5:
Switch(config)# remote command 5 undebug all
Switch :5 :
------------
UDLD events debugging is on
OL-13271-03
remote command {all | stack-member-number} LINE
Modification
This command was introduced.
Apply to all stack members.
Specify the stack member. The range is 1 to 9.
Specify the command to execute.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
remote command
2-417
Advertisement
Table of Contents
