dot1x mac-auth-bypass
Examples
This example shows how to enable MAC authentication bypass and to configure the switch to use EAP
for authentication:
Switch(config-if)# dot1x mac-auth-bypass eap
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands
Command
show dot1x
interface-id]
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-138
Chapter 2
Description
[interface
Displays IEEE 802.1x status for the specified port.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
OL-13271-03