lldp med enable
The lldp med enable Interface Configuration mode command enables Link Layer Discovery Protocol
(LLDP) Media Endpoint Discovery (MED) on an interface. Use the no form of this command to disable
LLDP MED on an interface.
Syntax
•
lldp med enable [tlv1 ... tlv3]
•
no lldp med enable
•
tlv — Specifies TLV that should be included. Available TLVs are: network-policy and location. The
capabilities TLV is always included if LLDP–MED is enabled.
Default Configuration
LLDP is disabled.
Command Modes
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example enables Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery
(MED) on an interface as network-policy.
Console(config)# interface ethernet g5
Console(config-if)# lldp med enable network-policy
lldp med network-policy (global)
The lldp med network-policy Global Configuration mode command defines LLDP MED network
policy. Use the no form of this command to remove LLDP MED network policy.
259
LLDP Commands