Show Qos Policy-Map-Input - Dell MXL 10GbE Reference Manual

detail interface
Defaults none
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Example (IPv4)
Dell#show qos policy-map detail tengigabitethernet 0/0
Interface tenGigabitEthernet 4/1
Policy-map-input policy
Trust diffserv
Queue# Class-map-name Qos-policy-name
0
1
2
3
Example
Dell#sho qos policy-map summary
(Summary IPv4)
Interface policy-map-input policy-map-output
Gi 4/1
Te 4/2
Dell#

show qos policy-map-input

View the input QoS policy map details.
Syntax
show qos policy-map-input [policy-map-name] [class class-map-
name] [qos-policy-input qos-policy-name]
Parameters
policy-map-
name
Quality of Service (QoS)
To view a policy map interface in detail, enter the keyword
detail and optionally one of the following keywords and
slot/port or number information:
• For a 40 Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
• For a 10 Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
EXEC
EXEC Privilege
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
-
CM1
CM2
CM3
PM1
PM2
Enter the policy map name.
q0
q1
q2
q3
-
PMOut
1097