Ip Address, Virtual Server Dn, Or Pool Name Does Not Appear On The Imanager Cluster Configuration Page; Section 4.20, "Ip Address, Virtual Server Dn, Or Pool Name Does Not Appear On The Imanager Cluster Configuration Page - Novell BUSINESS CONTINUITY CLUSTERING FOR NETWARE 1.1 - ADMINISTRATION Manual

You must also change the IP address on the protocols page for the virtual server. Changing the
IP address on the protocols page will cause the load and unload scripts to automatically update.
The virtual server has an extra IP address.
Use the General tab in ConsoleOne
extra IP addresses, do the following:
1. Click Page Options and disable the General tab.
2. Click Cancel to exit the properties dialog box.
3. Access the properties dialog box again.
4. Click the Other tab and delete the extra IP addresses.
The attribute is Network Address. Do not delete the entire attribute, just the values for the
extra IP addresses.
5. Click Page Options and enable the General tab.
6. Click Apply to save your changes.
4.20 IP Address, Virtual Server DN, or Pool Name
Does Not Appear on the iManager Cluster
Configuration Page
You might see a DSML read error if you select properties for a cluster object and then click the BCC
tab.
The eDirectory pointers for the cluster resource are either missing or are invalid. The following list
shows the required attributes. The format for the list is:
Object in the directory (Object Class Name)
Attribute Name -->The object in the directory the attribute points to
Attribute Name -->The object in the directory the attribute points to
Clustered Volume (Object Class "NCS:Volume Resource")
NCS:NCP Server -->Virtual NCP Servers
NCS:Volumes-->All Volumes
Virtual NCP Server (Object Class "NCP Server")
Resource-->Cluster Resource
NCS:NetWare Cluster-->Cluster Object
NCS:Volumes-->All Volumes
Volume (Object Class "Volume")
nssfsPool-->Pool Object
Host Server-->Virtual NCP Server
Pool (Object Class "nssfsPool")
®
to view the IP addresses for the virtual server. If there are
Troubleshooting BCC 1.1 67