Resource Script Search And Replace Functions Do Not Work; Virtual Ncp Server Ip Addresses Won't Change (Netware); Ip Address, Virtual Server Dn, Or Pool Name Does Not Appear On The Imanager Cluster Configuration Page; Section 4.18, "Resource Script Search And Replace Functions Do Not Work - Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - 9-21-2010 ADMINISTRATION GUIDE FOR OPEN ENTERPRISE SERVER 1 SP2 LINUX Administration Manual

4.18 Resource Script Search and Replace
Functions Do Not Work
If resource script search and replace functions are not working, the problem might be caused by one
of the following conditions:

You did not click the Apply button on the Properties page. Clicking OK when entering the
scripts does not apply the changes to the directory.

You added the search and replace values to the resource instead of to the cluster.
The search and replace values apply to a specific resource instead of all resources in the cluster.

If you are testing search and replace functionality, you might have made the changes too
rapidly.
Identity Manager merges all changes into one, so if you quickly add a change and then delete it,
Identity Manager might view it as no change. You should make a change and verify that the
change has synchronized with the other cluster before deleting it.
4.19 Virtual NCP Server IP Addresses Won't
Change (NetWare)
If the IP address for a virtual (NCP) server does not change properly, the problem may be caused by
one of the following conditions:

The IP address has been changed only on the load and unload script pages.
You must also change the IP address on the protocols page for the virtual server. Changing the
IP address on the protocols page causes the load and unload scripts to automatically update.

The virtual server has an extra IP address.
Use the General tab in ConsoleOne
extra IP addresses, do the following:
1. In ConsoleOne, click Page Options and disable the General tab.
2. Click Cancel to exit the properties dialog box.
3. Access the properties dialog box again.
4. Click the Other tab and delete the extra IP addresses.
The attribute is Network Address. Do not delete the entire attribute, just the values for the
extra IP addresses.
5. Click Page Options and enable the General tab.
6. Click Apply to save your changes.
4.20 IP Address, Virtual Server DN, or Pool Name
Does Not Appear on the iManager Cluster
Configuration Page
You might see a DSML read error if you select properties for a Cluster object and then click the
BCC tab.
®
to view the IP addresses for the virtual server. If there are
Troubleshooting Business Continuity Clustering 1.1 73