Table of Contents
Advertisement
Additional Info: PolicyEnforcer Exception: file does not exist.
39.4 Debugging and Logging ZMD
The ZENworks Management Daemon (ZMD) provides the following preferences that can be used
for debugging and logging ZMD:
log-level: Used to set up custom logging levels. The valid values are off, fatal, error, warn, info,
and debug. To set the value of the preference, use the
'preference_value'
rug set log-level 'debug'
) on a managed device or see
rug
log-soap-xml: Used to log SOAP messages. All messages are logged in the
messages.log
devices, and in the
For detailed ZMD logging information on SLES 10 and SLED 10, you can also refer to
zmd-backend.log
variable.
39.5 Viewing the Debug Logs on ZENworks
Server
The following logs are available on ZENworks Server:
ZENworks Server Logs: The ZENworks Server logs are located in the
log/zenworks
example, the operations of ZENserver and ZENloader are logged in the
messages.log
If you want to collect additional debug logging information for ZENworks Server, do the
following:
1. Edit the
following lines:
<LoggerModule trace = "true">
<param name="fileDebug" enable = "true" value ="true" />
2. Restart all the zlm services by using the
If you want to collect additional debug logging information for ZENworks Loader or its
modules, do the following:
1. Edit the
opt/novell/zenworks/logger-server-conf.xml
lines:
<LoggerModule trace = "true">
<param name="fileDebug" enable = "true" value ="true" />
2. Edit the
configure any specific loader module as follows:
<logger name="LocalLogger.ComponentName" additivity="true">
<level value="debug"/>
522 Novell ZENworks 7.3 Linux Management Administration Guide
command. For example, to set the log-level preference to debug, use
. For more information about rug, view the rug man page (
rug (1) (page
file. The file is located in the
/var/opt/novell/log/zenworks
. For extensive logging of ZYPP, configure the ZYPP_FULLOG environmental
directory. Each log file corresponds to an individual component or service. For
and
loader-messages.log
etc/opt/novell/zenworks/logger-server-conf.xml
/etc/opt/novell/zenworks/logger-loader-conf.xml
/etc/opt/novell/zenworks/logger-log4j-loader-conf.xml
rug set log-level
586).
directory on SLES 10 and SLED 10
/var/log/
directory on all other devices.
files respectively.
zlm-config --restart
file to configure the following
man
zmd-
/var/log/
/var/opt/novell/
services-
to configure the
command.
file and the
/etc/
file to
Advertisement
Table of Contents
