Viewing Status Logs; Accessing The Driver Set Status Log - Novell IDENTITY MANAGER 3.6. - INTEGRATION Integration Manual

8 After you have specified the maximum number, click OK.

5.2 Viewing Status Logs

The status logs are short-term logs for the driver set, the Publisher channel, and the Subscriber
channel. They are accessed through different locations in iManager.
Section 5.2.1, "Accessing the Driver Set Status Log," on page 29
Section 5.2.2, "Accessing the Publisher Channel and Subscriber Channel Status Logs," on
page 30

5.2.1 Accessing the Driver Set Status Log

The status log for the driver set contains only messages generated by the engine, such as state
changes for any drivers in the driver set. All engine messages are logged. There are two ways to
access the driver set status log:
"Viewing the Log from the Driver Set Overview Page" on page 29
"Viewing the Log from the Driver Overview Page" on page 29
Viewing the Log from the Driver Set Overview Page
1 In iManager, select Identity Manager > Identity Manager Overview.
2 Browse to and select the driver set.
3 Click the driver set to access the driver set overview page.
4 Select Driver Set > View status log.
Viewing the Log from the Driver Overview Page
1 In iManager, select Identity Manager > Identity Manager Overview.
2 Browse to and select the driver set.
3 Click the driver set to access the driver set overview page, then click any driver.
The status log for the driver is stored on the driver overview page for each driver.
4 Click the Driver Set Status Log icon above the driver object.
Using Status Logs 29