Setting Serial Data Output - Omron ZW-C1*T User Manual

Setting Serial Data Output

Setting the data output destination p.174
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8 Repeat steps 5 to 7 to set other items.
9
ZW User's Manual
Display Description
Press and hold the
Press the
Press the
key.
Select the setting item:
OUTPUT: Data output destination
FORMAT: Output data type
INT.NUM: Digits of integer
DEC.NUM: Digits of decimal
ZEROSP: Zero suprression
FIELD: Field separator
RECORD: Record separator
In this example, press the
the
Automatically Following the Range of Measurement Area2
The current setting value is displayed on the sub-display.
Press
Select the data length, and press the
Press the
Select the save count.
Press the
Press and hold the
key for two seconds to enter the FUN mode.
/ keys to select "I/O" and press the
/ keys to select "COM.OUT" and press the
/ keys, select "OUTPUT" and press
key.
/ key to enter editing mode and the sub-display blinks.
key to return to the previous menu.
/ keys to select "FORMAT" and press the
key for two seconds to enter the RUN mode.
Connecting by No-protocol Communications
key.
key.
key.
279