3-4 Perform the Zero Reset
Zero reset
What is Zero Reset?
This function allows resetting the measured value to "0" at any timing during measurement in the RUN mode.
The measured value can be displayed and output as a positive or negative deviation (tolerance) from the set
reference value "0".
Example 1: Use the height of the sensing object as a reference value and the deviation is the measured value.
0
(reference value)
Example 2: Use the measured value according to the height of the sensing object (set 10 as an offset value)
10
100
Perform the Zero Reset
Sensor head
+0.5 (HIGH threshold value)
Sensing
-0.5 (LOW threshold value)
object
Sensor head
+10.5 (HIGH threshold value)
Sensing
+9.5 (LOW threshold value)
object
ZW-8000/7000/5000
User's Manual