Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Adjusting the headlight
Proceed as follows:
- The vehicle is ready to drive, unloaded and with
correct tire pressure on a flat surface in 10
m distance in front of a white one in partial shade
the wall, the vehicle axle
must be at right angles to the wall.
- Remove the upper shield cover.
- Turn on the headlight and check that
the upper light-dark boundary on the wall does not
about 9/10 of the center of the headlight from the ground and
is not less than 7/10.
- Otherwise adjust the headlight by
the corresponding screws can be turned.
WARNING
THE PROCEDURE SPECIFIED IS SPECIFIED BY THE
"EUROPEAN STANDARD" FOR THE MAXIMUM AND
MINIMUM HEIGHT OF THE HEADLIGHT BEAM.
NEVERTHELESS, THE APPLICABLE REGULATIONS IN
THE INDIVIDUAL COUNTRIES OF USE OF THE VEHICLE
MUST BE CHECKED.
anti-evaporation system
The vehicle is equipped with the "canister", the essential component of the system for controlling the Ver
vapor emissions of fuel equipped, in accordance with current standards.
maintenance
WAR - 65
Advertisement
Table of Contents
