Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Check springs and half cones
- Check that the upper and lower spring plates,
the half cones and the oil seals are not abnormal
are worn out. Otherwise, this must be the case
corresponding component must be changed.
- Measure the free spring length.
Technical specifications
Standard length:
44,4 mm
Permissible limit value after use:
42,4 mm
Installation of valves
- The rests of the valve springs in the cylinder head
insert.
- With the specified special tool
Insert the 4 valve sealing rings alternately.
- The valve sealing rings and the valve guides
lubricate.
Special tool
020306Y Impact mandrel for installing the valve
sealing rings
- The valves, the springs and the spring plates
lead. With the specified special tool
and adapter compress the springs and
attach the half cones to their seats.
Special tool
020382Y Tool for removing the valve
Half cone equipped with part 012
020382Y012 Cylindrical spacer
(Tool for removing the valves)
Motor
AGAINST - 191
Advertisement
Table of Contents
