Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Check phase setting of valve control
- Remove the plastic cover from the alternator cover
take.
- Turn the flywheel until the mark
on the rotor as shown in the figure
Marking on alternator cover aligned
tet ist (OT).
- Make sure that the 4V mark on the
Drive pulley of the camshaft onto the mark
is aligned with the cylinder head. Located
the marking is on the opposite one
Side to the marking on the cylinder head must be the
Crankshaft rotated another revolution
become.
Check valve clearance
The valve clearance must be checked accordingly
the information from the table for maintenance
program can be carried out.
- Place the vehicle on a suitable bridge,
so that the rear wheel can be blocked.
- Disconnect the battery cables.
- The luggage racks, the rear sides and the
Remove running boards.
- A scissor lift under the vehicle
attach.
maintenance
WAR - 57
Advertisement
Table of Contents
