Machine Translated by Google
body
- The front section of the shield front from
Remove vehicle.
- Work from the inside of the wheel arch and
the three fastening screws of the side Ab
Remove section of shield.
- Raise the side section to the three
Fastening straps from the back of the shield
disconnect, then remove the component from the vehicle
distant.
- The work for the side section on the ge
repeat on opposite side.
ASSEMBLY
- Install the side section of the front shield
hours on the vehicle, inserting the three tabs from above
fastening to the back shield. Make sure of the correct
to coupling between the two components.
WARS - 280
MP3 530 hpe