Table of Contents
Advertisement
Machine Translated by Google
Motor
020565Y Face wrench for blocking the alternator
Recommended products
Loctite 243 Medium strength thread locking
sealant.
Colour blue
Torque guide values (N*m)
Fastening screws retaining bell
Ventilhebermasse 30 ÷ 35 Nm (22 ÷ 26 lb*ft)
- Set the tensioner rotor to the rest position
position. While doing this, press the retaining bar
hold.
- The tensioning device with a new seal
install on the cylinder.
- The two fastening screws with the attached
Tighten to the specified torque.
Torque guide values (N*m)
Fixing screws clamping device11 ÷
13
- The spring with the middle screw and the
Insert washer.
- The middle screw with the prescribed one
Tighten torque.
Torque guide values (N*m)
Chain tensioner screw 5 ÷ 6
- Turn the engine until the valve timing markings line up with the valve setting
Markings on the cylinder head are aligned.
- Measure the clearance between the valve and the rocker arm using a gauge.
AGAINST - 198
MP3 530 hpe
Advertisement
Table of Contents
