Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
DANGER
PERFORM THE ADJUSTMENT PROCESS WHEN THE
EXHAUST IS COLD AND WEAR APPROPRIATE PROTECTIVE GLOVES
AND WEAR CLOTHES.
ANNOTATION
WITH ITS TWO TEETH THE KEY CAN
FOR THE INDIVIDUAL POSITIONS SHOWN IN
BOTH DIRECTIONS CAN BE USED.
RESET MAINTENANCE SYMBOL
Every time you turn the ignition key to "ON",
after the initial testing of the fitting
boards if less than 300 km (186.41 mi) to
missing for the next inspection, the flashes
given symbol for 5 seconds.
When the mileage reaches the inspection
is, the symbol remains every time the ignition is turned
Pressing the key to «ON» switches it on permanently until
the inspection is carried out.
To reset the maintenance symbol as follows
proceed:
- select the "BATTERY" function .
- Press the "SET" button for more than 10 seconds
hold down.
- When you release the button it will correspond
de maintenance step reset and the symbol
disappears.
METHOD FOR ADJUSTING THE THREADED RINGS ON THE SIDE STEERING TUBE
maintenance
WAR - 47
Advertisement
Table of Contents
