Machine Translated by Google
Motor
This section describes the work on the engine and the tools required for it.
Automatic drive
Gearbox cover
- Unscrew the 4 fastening screws.
- Remove the outer plastic drive cover.
- Use a screwdriver to open the cover
Remove the driven pulley axle.
- The special tool in the designated areas
Install slots and the nut of the output
Unscrew the disc axle.
- Remove the nut and the two washers
distant.
- Remove the special tool.
Special tool
021022Y Stop guided pulley
AGAINST - 126
MP3 530 hpe