PIAGGIO MP3 530 hpe Service Station Manual page 133

Machine Translated by Google
Motor
Check the compression spring
The free length of the compression spring
between the clutch and the guided pulley half mes
its.
Technical specifications
Standard length:
146,5 mm
Maximum permissible length according to use:
137,0 mm
Installation of the clutch
- The special tool as used for removal
Equip additional parts.
- The assembly guided pulley together
temporarily assemble the men with the belt.
Pay attention to the running direction of the belt.
- The assembly guided pulley, the spring with
protective cover and the clutch in the factory
use stuff.
Special tool
020444Y Tool for attaching and removing the
Clutch on the guided pulley
- Compress the spring and insert the coupling into the bushing of the guided pulley
was
ANNOTATION
MAKE SURE THAT THE PROTECTIVE COVER AND THE THREADED PART OF THE SOCKET
TO BE DAMAGED.
- Tighten and tighten the threaded ring manually
closing with the specified special work
with the specified torque
tighten.
Special tool
020444Y Tool for attaching and removing the
Clutch on the guided pulley
Torque guide values (N*m)
Threaded ring coupling 65 - 75
AGAINST - 136
MP3 530 hpe