Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- To facilitate installation on the engine, turn the guided movable pulley and the
Insert the belt at the smallest diameter.
Installation guided pulley
- The assembly guided pulley together
Insert the men with the belt.
drive belt
- Check that the drive belt is not damaged
is right.
- Measure the belt width.
Technical specifications
Minimum width
27,5 mm
Total width
28,7 mm
Removing the drive pulley
- Assemble the special tool by
first attach the two retaining straps to the strap
disc attaches so that the notch is complete
rests.
Special tool
020474Y Key to block the on
drive pulley
Motor
AGAINST - 137
Advertisement
Table of Contents
