Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- Measure the bend of the valve stem. Plus that
Place the valve on a V-shaped holder and the
Measure the bend with a dial indicator.
Technical specifications
Permissible limit:
0,1 mm
- The rounding of the valve head with a dial indicator
measure. To do this, the dial indicator must be at right angles
be attached to the valve head. The valve
is rotated on a V-shaped holder.
Technical specifications
Permissible limit:
0,03 mm
Guide clearance - valve clearance
- After measuring the diameter of the valve guide and the diameter of the valve stem, the
Calculate the fitting clearance between the valve guide and the stem.
Technical information
Standard installation clearance:
Permissible limit:
Technical information
Standard installation clearance:
Permissible limit:
SUCTION
OUTLET
Technical data
Description/Value
0,013 ÷ 0,04 mm
0,08 mm
Description/Value
0,025 ÷ 0,052 mm
0,09 mm
DT - 31
Advertisement
Table of Contents
