PIAGGIO MP3 530 hpe Service Station Manual page 117

Machine Translated by Google
Engine out of the vehicle
This section describes the operations to be carried out to remove the engine from the vehicle.
Removal of complete exhaust
- Remove the right and left running boards.
- Unscrew the four fastening screws
and remove the heat protection.
ANNOTATION
It is NOT necessary to remove the running boards just to
dismantle the end piece.
- The metal clamp between the exhaust tailpipe and
Loosen the manifold.
- The three exhaust mounting screws
Remove tailpipe.
- Remove the exhaust pipe end piece by
pulls it off the manifold.
DANGER
IF ONLY REMOVING THE EXHAUST PIPE IS REQUIRED,
ALWAYS A NEW GRAPHITE GASKET
PLACE A BETWEEN THE PIPE PIECE AND THE END
PIECE.
MOT DRIVING - 120
MP3 530 hpe