Table of Contents
Advertisement
Machine Translated by Google
Motor
Checking the valve control components
- Check whether the chain tensioner pad and
the chain tensioner is not excessively worn
are.
- The unit drive sprocket camshaft and
Check crankshaft pinion for wear.
- If there is any wear and tear, the appropriate ones must be taken into account
Components are replaced. When worn
Chain or sprocket must be the entire unit
be replaced...
ANNOTATION
IF THE PINION HAS BEEN DAMAGED BY THE CHAIN, THE CRANKSHAFT MUST BE REPLACED.
SEE INSTRUCTIONS IN THE CHAPTER "ENGINE CASE AND CRANK SHAFT".
Chain tensioner
- Remove the middle screw and the Unver
Check seal integrity.
Chain tensioner
- Make sure that the mechanism does not
shows wear and that the chain tensioner
correctly when turning with a screwdriver
can be activated or deactivated.
- If wear or malfunctions are detected
the chain tensioner must be replaced
the.
AGAINST - 188
MP3 530 hpe
Advertisement
Table of Contents
