Table of Contents
Advertisement
Machine Translated by Google
Motor
Torque guide values (N*m)
Oil pump cover screws 0.7 ÷ 0.9
- Insert the oil pump complete with gear.
- Insert the 2 screws through the slotted holes on the gear and with the prescribed rotation
tighten moment
ANNOTATION
THE OIL PUMP INSTALLATION IS DONE BY INSTALLING THE SCREWS
SPECIFIED.
If the specified torque is not set
hold, this can affect the passing clearance of the rotors
change the pump housing.
Torque guide values (N*m)
Oil pump fastening screws to the housing
with 5 ÷ 6
- The countershaft together with the gear
into the housing half on the alternator side
insert.
- The special tool as shown in the picture
shows attach.
Special tool
020479Y Tool for locking the countershaft
- Hold the countershaft in position and
insert the nut and washer.
- The nut with the prescribed torque
ment tighten. The recommended product
attach.
- Remove the special tool.
Suggested products
Loctite 243 Medium strength thread locking
sealant.
Colour blue
Torque guide values (N*m)
Countershaft fixing nut 25 ÷ 29
AGAINST - 224
MP3 530 hpe
Advertisement
Table of Contents
