Table of Contents
Advertisement
Machine Translated by Google
Motor
Remove the control bushing.
INSTALLING THE REVERSE GEARS AND MOTOR
ANNOTATION
BEFORE INSTALLING THE CONTROL BUSHING, THE FLAT
LUBRICATE THE SEALING RING IN THE GEAR COVER AND
THE CLUTCH SURFACE OF THE BUSHING.
Suggested products
Gear oil 80W-90 lubricant for gears
and drives.
SAE 80W-90 API GL-4
The control socket from the inside of the An
drive cover and the blocking disk from the ge
insert on the opposite page.
Tighten the ring nut by hand.
AGAINST - 240
MP3 530 hpe
Advertisement
Table of Contents
