Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- The piston rings and the oil scraper from the col
remove ben.
DANGER
WRITE DOWN THE INSTALLATION POSITION OF THE
PISTON RINGS SO THAT THEY CANNOT BE MIXED UP
IN ANY WAY OF INSTALLATION.
ANNOTATION
ENSURE THAT THE PISTON RINGS ARE NOT DAMAGED
DURING DISASSEMBLY.
Checking the connecting rod head
-Use an internal bore gauge to determine the diameter
Measure the connecting rod base and check whether the value in
within the "Technical Data" section
given limits.
- If the measured value is incorrect, the crank
shaft as described in the "Crankshaft" chapter
"build" described, exchange.
Check piston pin
Check that the operating limits of the piston pin are within the values specified in Section
"Technical data" are given. If the measured values are not correct, the col
ben bolts need to be replaced.
Check piston
- Check that the operating limits of the piston and the coupling values with the cylinder are within
the values specified in the "Technical data" section . If the measured values are not
are correct, the piston and/or cylinder must be replaced.
- Check that the coating on the cylinder is not deformed or peeled off.
- Check that the mating surfaces with the cylinder head are not worn or deformed.
ANNOTATION
Pistons and cylinders must be coupled taking the classes into account. It is not
possible to assemble components of different classes.
Motor
AGAINST - 183
Advertisement
Table of Contents
