Table of Contents
Advertisement
Machine Translated by Google
Motor
DANGER
SCREW IN MANUALLY UNTIL THE STOP.
- Attach the integral seal to the shaft.
- Attach the calibrated striking mandrel (with preload
measurement).
- Attach the nut to the threaded bolt.
- Hold the threaded bolt firmly and tighten the nut
screw tight until it stops.
- The tool is used to press the static seat into the
housing and the movable seat onto the shaft and at
the same time the ceramic seal
correctly pre-tensioned.
- Screw the impeller tight.
Torque guide values (N*m)
Water pump impeller 4 ÷ 5
- Install the pump cover with a new gasket. The
seal must be lubricated with Vaseline grease before
installation.
- Attach the six screws to the cover and
Tighten to the specified torque
hen.
ANNOTATION
TO AVOID DEFORMATION, DO NOT LUBRICATE THE
O-RING WITH MINERAL GREASE.
Torque guide values (N*m)
Water pump cover screws 3 ÷ 4
AGAINST - 228
MP3 530 hpe
Advertisement
Table of Contents
