Machine Translated by Google
Brake system
- Install the brake pad retaining spring
and insert the bolt into the brake caliper.
- Insert the R-split on the brake caliper bolt
was
- Reinstall the brake caliper.
Rear brake pads
Installation
- For mounting the brake pads in reverse
Proceed in the same order as for removal.
- Clean the threads of the brake pad pins and
"LOCTITE 243" thread locking sealant
Apply and with the specified torque
put on.
Torque guide values (N*m)
Brake pad pin 17.5 ± 2.5
BREM - 254
MP3 530 hpe