Table of Contents
Advertisement
Machine Translated by Google
Motor
Troubleshooting
1 - The oil pressure control switches on when the engine is warm.
CONTINUE - point 2
2 - Disconnect the cable connector from the oil pressure switch.
Check whether the oil pressure control switches off.
YES point 3 NO point 11
3 - Check actual oil pressure.
CONTINUE - point 4
4 - Remove the oil pressure switch and use the specified special tool together with the included
Attach the corresponding seal.
Special tool
020193Y Pressure gauge for oil pressure control
020434Y Connection for oil pressure control
- Remove the filler plug with dipstick and use one for the temperature sensor
Attach the fastener prepared using a special tool. Insert the probe until it comes into contact with
If you notice it on the bottom of the case, then move it back a few millimeters.
Special tool
020331Y Digital Multimeter
CONTINUE - point 5
5 - Measure the oil pressure with the engine cold and idling.
~ 4,5 bar
ANNOTATION
THE SPEED CAN BE DETERMINED BOTH VIA THE EMISSION MEASUREMENT DEVICE AND VIA THE DI
AGNOSES TEST DEVICE TO BE MEASURED
Special tool
020922Y Diagnose-Instrument
YES point 6 NO point 12
AGAINST - 218
DEFAULT VALUES
Technical information
20°C temperature
1400 U/Min
MP3 530 hpe
Description/Value
Advertisement
Table of Contents
