Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
Installation of cylinders
- Install the cylinder base gasket with the
previously determined thickness.
- Using the fork to place the piston and the clamp,
fix the cylinder as shown in the picture
install.
ANNOTATION
BEFORE INSTALLING THE CYLINDER,
THOROUGHLY BLOW THROUGH THE LUBRICATION
LINES AND OIL THE CYLINDER TUBE. MAKE SURE
THE TWO CENTERING PINS ARE PRESENT.
Special tool
020468Y Clamp for piston installation
020512Y Fork for installing the piston
Check cylinder head
- Using a smoothly ground rod and a blade gauge, check that the cylinder head bearing surface is not
worn or deformed.
Technical specifications
Maximum permissible deviation:
0,1 mm
- If abnormalities are found, the cylinder should be
the head needs to be replaced.
- The sealing surfaces with the intake port
and check the exhaust manifold.
- The running surfaces of the camshaft and the
Check rocker arm bolts for wear.
- The contact surface of the cylinder head cover
Check wear.
- Check the coolant seal buffer for oxidation
check traces.
Motor
AGAINST - 187
Advertisement
Table of Contents
