Table of Contents
Advertisement
Machine Translated by Google
Motor
- If necessary, the position of the screw
change here.
- When dismantling the seal it can happen
that the ceramic breaks.
- Clean all parts thoroughly before pulling out.
- The puller complete with pin on the static
Attach part of the ceramic seal.
- Without changing the position of the puller, with
the pin and a hammer three holes on the sta
Attach the table part of the seal.
ANNOTATION
THE HOLES MUST BE MADE WITH A STRONG PUNCH.
LIGHT AND REPEATED IMPACT MAY CAUSE
DEFORMATION WITHOUT MAKING HOLES.
- The puller with the screw included in the tool on the static
part of the seal
attach.
DANGER
THE TOOL MUST BE WELL FIXED, WITHOUT
TO "TEAR" THE SHEET.
AGAINST - 226
MP3 530 hpe
Advertisement
Table of Contents
