Table of Contents
Advertisement
Machine Translated by Google
Motor
- Unscrew the fastening screws.
2 screws
- Remove the ground cable and the cable
retaining bracket, then the complete starter motor
pull out gate.
Removing the flywheel magneto
- Align the two holes on the flywheel with the
openings on the housing
so that the special tool is attached
can be.
- The bushing belonging to the locking tool
onto the thread for the extractor
screw.
- Attach the special tool as shown in the
illustration. Make sure that the pins are perfectly
aligned with each other
Openings are inserted and that the tool is
inserted up to the stop (almost flush with the
flywheel) is attached.
Special tool
020472Y Key to block the alternator
AGAINST - 168
MP3 530 hpe
Advertisement
Table of Contents
