Table of Contents
Advertisement
Machine Translated by Google
Motor
- The motor via the nut on the drive belt
Turn the disc until the two marks
ations for OT are aligned with each other.
- The markings on the drive belt sheave
Align the drive cover and drive cover with each other.
- Reinstall the lock on the inspection opening on the alternator side.
- Connect the diagnostic test device.
- Start the engine.
- Select the «Parameters» function from the menu.
- Set the strobe lamp control to the position of a traditional 4-stroke engine (1 spark
= 2 revolutions).
- The values specified on the diagnostic test device for advancing the ignition timing with the
compare actual values.
Special tool
020922Y Diagnose-Instrument
If the values differ from each other, the following must be checked:
- Ignition adjustment
- Speed phase sensor
- Injection control electronics
AGAINST - 200
MP3 530 hpe
Advertisement
Table of Contents
