PIAGGIO MP3 530 hpe Service Station Manual page 145

Machine Translated by Google
Motor
Removing rear wheel gearbox bearing housing
- The condition of all bearings (wear, play and
Check noise development).
If errors are found, proceed as follows.
The following tools are required to remove the wheel axle
bearing from the housing of the rear wheel transmission.
Special tool
001467Y014 Pliers for removing bearings
Ø 15 mm
001467Y031 Pliers for removing bearings with
Ø 15 mm
001467Y031 Korb
- To remove the countershaft bearing
The motor housing must have the corresponding off
pulling device can be used.
Special tool
001467Y006 Pliers for removing bearings with
20 mm
001467Y035 Basket for bearings with external
diameter Ø 47 mm
- The rear gearbox cover with the columns
support sentence.
- Remove the bearing using the special tool.
Special tool
020476Y screw bolt
001467Y006 Pliers for removing bearings with
20 mm
001467Y007 Basket for bearings with external
diameter Ø 54 mm
AGAINST - 148
MP3 530 hpe