PIAGGIO MP3 530 hpe Service Station Manual page 179

Machine Translated by Google
Motor
- Remove the spring supports.
ANNOTATION
TO EASIER REMOVAL OF THE SPRING PADS, COMPRESSED
AIR CAN BE BLOWED INTO THE SEATS.
Cylinder - piston removal
- Remove the valve timing chain.
- Unscrew the fastening screw and the
Spacer and the chain tension shoe
distant.
ANNOTATION
THE VALVE TIMING CHAIN SHOULD BE MARKED SO THAT THE
ORIGINAL RUNING DIRECTION CAN BE MAINTAINED.
- The cylinder with the associated seal and
pull off the centering pin.
ANNOTATION
THE SECOND CENTERING PIN IS FIRMLY PRESSED INTO THE
CYLINDER.
DANGER
TO AVOID DAMAGE TO THE PISTON, THE SER MUST BE HELD
WHEN REMOVAL OF THE CYLINDER.
- Remove the 2 piston pin circlips via the corresponding
grooves.
- Pull out the piston pin and the piston
Remove.
ANNOTATION
SEAL THE CYLINDER OPENING ON THE ENGINE CASE WITH
PAPER OR A CLOTH SO THAT THE TWO SNAP RINGS OF THE
PISTON PIN CANNOT FALL INTO THE ENGINE INSIDE.
AGAINST - 182
MP3 530 hpe