Table of Contents
Advertisement
Machine Translated by Google
Motor
Check piston rings
- Place the 3 piston rings one after the other in the area
of the cylinder, where it still has its position
original diameter. The piston rings
using the piston at right angles to the cylinder
Insert axle.
- Check that every single piston ring is the same
lies moderately against the cylinder liner. Abnormal wear of
the piston ring is a sign
that this is not the case. Replace.
- The opening of the piston ring joints as shown in Fig
education shown measuring with a dial gauge.
- If the values are higher than those in the section
"Technical data" stated, drive
continue with the replacement of the segments.
Installation of pistons
- The piston and the piston pin on the connecting rod
attach head. Attach the piston so that
the arrow points to the outlet opening.
- Insert the piston pin circlip into the
Use the specified special tool.
S = links
D = right
- Remove the piston pin circlip with a
Install punch mandrel.
AGAINST - 184
MP3 530 hpe
Advertisement
Table of Contents
