Table of Contents
Advertisement
Machine Translated by Google
Electrical system
3. Start procedure in Self Diagnosis > Pro
Programming the keyless remote controls
through PADS:
3.1 With ignition key set to "ON",
3.2 The self-diagnosis of the keyless control unit
call,
3.3 Possible errors in memory in the "MEM" status
eliminate, and/or resolve the problems
continue,
3.4 Access the Settings section and
the setting>programming remote control
start according to the ge offered by PADS
conducted procedure,
3.5 At the end of each remote control program
PADS displays the message "Programming
"successful" with the following message
Programming a new remote control, ma
maximum 4 remote controls (***),
(***) The keyless control unit switches between
programming a remote control and
the other has 5 seconds of time available.
End of the remote control programming process.
ELE ANL - 118
MP3 530 hpe
Advertisement
Table of Contents
