Table of Contents
Advertisement
Machine Translated by Google
MP3 530 hpe
- The fastening screws according to the
Use the position noted when dismantling.
4 long screws
3 short screws
- The screws with the specified rotation
Tighten momentarily and adjust to position
the retaining clamps of the ventilation line
pay attention as shown in the figure.
Torque guide values (N*m)
Screws cover rear wheel gearbox. 24÷27
- The rear gear oil drain plug
insert and with the prescribed rotation
tighten moment.
- The rear wheel transmission up to its maximum level
Fill with the specified oil.
Suggested products
Gear oil 80W-90 lubricant for gears
and drives.
SAE 80W-90; API GL-4
Torque guide values (N*m)
Rear gearbox oil drain plug15 ÷ 17 (11
÷ 12.5 lb*ft)
Alternator cover
- To make the alternator cover easier to remove
To be able to build, you need the 4 in the picture
hose clamps shown removed and the Muf
fe of the supply line on the cylinder and the return line
removed from the pump cover.
ANNOTATION
THE CLAMPS NEED TO BE REPLACED.
THEY CAN BE OPENED WITH A SCREWDRIVER OR CUT
THROUGH FOR REMOVAL.
MAKE SURE THAT THE PLASTIC CONNECTIONS ARE
NOT DAMAGED.
Motor
AGAINST - 155
Advertisement
Table of Contents
