Table of Contents
Advertisement
Machine Translated by Google
Motor
Torque guide values (N*m)
Air baffle screws 7.0 ± 1.0 Nm
Removing the shaft bearing of the guided pulley
- Remove the drive cover.
- Remove the seeger ring.
- The drive cover with a wooden plate and the
Support special tools.
- Remove the bearing using the special tool.
ANNOTATION
THE BASKET MUST BE PLACED UNDER THE INSIDE
OF THE LID NEAR THE BEARING SEAT AND THE
WOODEN SUPPORT BECAUSE WITHOUT THE BASKET
THERE IS A RISK THAT THE ENTIRE COVER
STRUCTURE WILL BEND, NOT JUST IN THE STIFFER
AREA. NOT ONLY IN THE STIFFER AREAS.
Special tool
001467Y002 Basket for bearings with external
diameter Ø 73 mm
020376Y Handle for adapter
020375Y Adapter 28 x 30 mm
020439Y Guide 17 mm
Installation of shaft bearing guided pulley
- The inside of the drive cover with a
Heat the heat gun.
ANNOTATION
TO AVOID DAMAGE THE PAINTED EXTERNAL SURFACE,
MAKE SURE NOT TO HEAT THE LID TOO HOT.
Special tool
020151Y hot air gun
AGAINST - 128
MP3 530 hpe
Advertisement
Table of Contents
