Machine Translated by Google
Motor
- tighten 90° in a crisscross sequence.
- tighten again by 90° in a crisscross sequence.
- The mounting screws on the inlet side
and on the outlet side with the prescribed
tighten to a certain torque.
Torque guide values (N*m)
Fastening nuts cylinder head exhaust/
Entrance 10 - 12
- The 3 side fastening screws with the
Tighten to specified torque.
Torque guide values (N*m)
Cylinder head fastening screws 10 - 12
- Using a 22 mm wrench, mount the sen
coolant temperature sore with
the relevant washer, locking it to the presc. torque
row.
DANGER
IF THE SPECIFIED TORQUE IS NOT MAINTAINED, THE
SENSOR MAY BE DAMAGED.
Torque guide values (N*m)
Sensor coolant temperature - cylinder head 22.0
± 1.0
- Fit the spark plugs, tightening them to the prescribed torque.
Torque guide values (N*m)
Spark plug 11.0 ± 1.0
AGAINST - 194
MP3 530 hpe